„DETLEF“ Step By Step – aka TFFKAPF

Veröffentlicht am 14/01/2016 von Holger Lachmann

The step by step tutorial about the PINK FLUFFY is destroyed. It don’t know why, but it was not shown right on the blog. So I did it again and I gave the fly a new name, because I didn’t like Pink Fluffy anymore.

So I called the fly „DETLEF“ – also known as the fly formerly known as PINK FLUFFY. Why? Don’t know , it just fits.

[vimeo]https://vimeo.com/150781439[/vimeo]

You can fish for sea trout even in the winter time. It’s a very hard kind of fishing with temperatures sometimes under 0°C, but there is a chance to catch an awesome „Silberbarren“. It’s common knowledge, that sea trouts like the color pink, especially in the cold season. It’s also common knowledge, that sometimes, the sea trouts like a very slow retrieve. For that situations, the DETLEF is a really good choise. The soft materials move very nice in the water, even if you strip the fly in very slowly. On the other hand, it’s not very complicated to tie and when you use other colors like beige, tan and brown, you got a very nice shrimp pattern for the rest of the year.

One very important point: Don’t use too much material! Less is more!

Materials used for this fly:

Hook: Gamakatsu F314 # 6
Weight: Lead Wire fine
Dubbing: Ice Dub Pearl, SLF Saltwater Dubbing Pink and SLF Saltwater Dubbing White/ Pearl
Front: Mallard, Pink Hackle Fibres
Antennas: Fluoro Fibre Pink
Eyes: Selfmade Shrimp Eyes
Horn: Polar Dub White Transparent
Loop-Hackle: White CDC and Pink Hackle
Back: Mallard
Thread: Veevus GSP 50D White

Do a little drop of superglue on the shank and wind on some fine lead wire.

Form a little dubbing ball with the ice dub at the end and tie in some fibres of Mallard.

Take a bit of pink SLF and tie it in.

Take some long soft fibres from a pink hackle and tie them in as shown. Add some strands of pink Fluoro Fibre antennas.

Dub a little ball with Ice Dub and tie in the shrimp eyes. The dubbing ball will seperate the eyes in a nice way.

Take some Polar Dub in white and tie it in as a horn.

Form a thread loop and then dub the body with the SLF.

Put a big white CDC feather on the Petitjean Magic Tool and push it in by using a pink hackle.

Grab the fibres with the clamp of the Magic Tool and and cut off the stems. Then put the fibres in the waxed thread loop and twist the loop.

Wind the hackle fibres-CDC-Mix around the body and catch it with your thread.

Some fibres from a Mallard feather will be used for the back of the fly. So, the fly swims in the right position and the black/white gives a great extra contrast. Do one or two whip finish and use some varnish to secure the knot. That’s it! Detlef is ready!

„Der Loppo“ Step By Step Tutorial

Veröffentlicht am 10/01/2016 von Holger Lachmann

I was asked so often in the last time for a step by step tutorial for the Sea Trout fly „Der Loppo“, that I finally made one.

This fly isn’t something „brand new“, „the next revolution“, „the game changer“ or anything like this. It’s just a mix of some ingredients of good flies mixed together to a fly, which I personally like and in which I put my faith when fishing. I made flies for my fishing in the past, which looked quite similar, but this is the final outcome.

Its got a nice semi translucency, it’s not too bright and not too unimpressive. You can tie it in different colors. I also like tan/white and orange as a color combination very much.

This example fly is tied on a hook size 4, but you can also tie it in size 6 with shorter fibres, when you want to fish it slower and the Sea Trouts just nibble on the longer fibres.

I even got a variation with black hackles and hot orange trigger points for murky water… looks very cool, too!

Ok, let’s start the step by step with a list of the materials:

Hook: Gamakatsu F314 #4
Weight: Lead Wire or substitute
Dubbing: Ice Dub Pearl, SLF Saltwater Dub White/Pearl
Mouth Part: Mallard and SLF Dub Pink
Hackles: Whiting Spey Hackle and a Grizzly Hackle stripped on one side
Horn: Senyos Laser Dub Gray
Antennas: Fluoro Fibre Pink
Eyes: Mono Eyes selfmade
Ribbing: Mono
Thread: 50D GSP white and 70D Uni Fluo Pink

Put the hook into the vise and wind the lead wire arounf the shank. To secure the lead, you could use a little drop of super glue. Attach the thread and form with the Ice Dub a little tight dubbing ball at the end of the shank.

Tie in the Mallard and the pink SLF as „mouth parts“.

The first spey hackle should be tied in like shown. It’s easier to wind it around this way. Go back with your tying thread to the little bump and secure so the thin fragile stem of the spey hackle. For a little extra color, tie in some Fluoro Fibres in pink.

I like to tie in some extra long hackle fibres for the extra movement. If you think they are too long, just skip this tying step.

Split the thread and put some Ice Dub in the gap, then twist the bobbin and wind the dubbing around. After that, give the dubbing a brush with your velcro.

Now the eyes and the mono for ribbing should be tied in.

For the horn section, tie in the Laser dub and do a first turn with the white/pearl SLF Saltwater Dub.

Tie in the grizzly hackle which was stripped on one side and dub the body using the SLF Saltwater Dub. Wind the grizzly hackle to the eye and leave enough space for the final hackle. Secure the hackle by ribbing the body incl. the hackle with the mono and catch it with the tying thread. Don’t forget the ribbing! ;) At the end, give the body and the hackle a strong brush with your velcro. The mix of hackle and SLF looks really cool in the water.

Wind around the second spey hackle and again secure the stem with your thread. It doesn’t matter, when in looks a bit bulky.

Take some extra spey fibres and tie them on top as a back. Looks in the water like the shrimp shell and makes sure the fly will always swim straight.

Do a whip finish with the GSP thread and cut it of. Then do a nice head using the fluo pink thread as a trigger point. Varnish the head or use Bug Bond uv resin to get a nice, shiny head.

That’s it!

Der Loppo ist fertig! :) I wish you a lot of fun tying and fishing this fly!

Der Loppo – Orange Variation

Veröffentlicht am 08/01/2016 von Holger Lachmann

Here’s an orange variation of „Der Loppo“. The step by step will be online this weekend.

Pink Dutchman

Veröffentlicht am 04/01/2016 von Holger Lachmann

Antworten

My good friend André Miegies gave me once some really nice feathers, which were dyed by himself in some terrifc colors. If I remeber right, it was white ear pheasant. Beautiful feathers with very long soft fibres. I used two feathers for this shrimp pattern in the successful color pink. As antennas, I used crazy legs, which give the fly a little bit extra movement.

André is from the Netherlands, so it’s clear why I gave the fly this name…. ;-)

Here are the materials:

Hook: Gamakatsu F314 #6
Antenna: Crazy Legs two toned
Horn: Senyos Laser Dub pink
Ribbing: Mono
Hackles: Spey Hackles made by André Miegies in Pink
Body: Ice Dub Pearl
Eyes: Mono Eyes made by Holger Lachmann

Ready To Rumble!

Veröffentlicht am 02/01/2016 von Holger Lachmann

10 Loppos in #4 and #6 and Polar Magnus for sea trout fishing in the Baltic Sea.

Pike Fluff – the last in 2015

Veröffentlicht am 29/12/2015 von Holger Lachmann

der Loppo

Veröffentlicht am 23/12/2015 von Holger Lachmann

Antworten

The Spey Shrimp Called „DER LOPPO“

Veröffentlicht am 19/12/2015 von Holger Lachmann

Antworten

Spey Shrimp For Sea Trouts

Veröffentlicht am 17/12/2015 von Holger Lachmann

I fish with worms… and you?

Veröffentlicht am 15/12/2015 von Holger Lachmann

Antworten

20151214_132447-1

Worm Fly Step By Step

Veröffentlicht am 15/12/2015 von Holger Lachmann

WORM-SBS-284

Every spring, the bristle worms (kind of a annelid) swarming in the Baltic Sea and the sea trouts are feeding like crazy on these worms and you really should have a worm pattern in your fly box, because you’ll never now, when the swarming will start. This worm pattern moves fantastic in the water and it’s worth the effort, even if a normal wooly bugger will catch fish. If you have tied one or two, you’ll see, that it’s really easy and fast to tie once you know how.

The first one who showed me this awesome technique to tie these worms was the master fly tyer Andy Weiß, one of the most creative fly tiers in the world and I’m glad to call him my good friend! He showed me a lot of tips and tricks over the years and I had some really cool and funny moments together with him in the last years. Andy, if you read this…what can I say…. cheers my friend!

Ok, back to business!

Here are the materials I’ve used:

Hook: Gamakatsu SC 15 #2 and #4 in the back
Thread: Dyneema thread white and UTC Ultra thread 70 fl. shell pink
UV-Resin: Bug Bond
Coloration: Marker Pen pink
Tail: Marabou brown
Body: Dyneema fishing line, UV Polar Chenille olive brown, Worm Wool brown (knitting wool)
Weight: Tungsten bead

WORM-SBS-116 WORM-SBS-215 WORM-SBS-34

Put the hook into the vise and tie in a bunch of marabou. Build a kind of bubble on the hook shank. It’s easier to do it with a thicker thread instead of your normal tying thread.

WORM-SBS-44 WORM-SBS-54

Tie over the white bubble with your tying thread in the color of your choise. Coat it with Bug Bond uv-resin. If you like it a bit fancy, do some small dots with your marker pen on the bubble and secure it with a second thin coating of Bug Bond to get the 3D effect. The bubble should imitate an egg ball and gives the worm a nice bite point.

WORM-SBS-64 WORM-SBS-74 WORM-SBS-84

Put the tungsten bead onto the front hook. Do a simple over hand knot in the dyneema fishing line and tie it onto the shank. Secure it with two drops of super glue and keep on tying and fold the dyneema back and forth like shown. No fish will ever destroy this connection!

WORM-SBS-94 WORM-SBS-104

Tie in the polar chenille and the worm wool.

WORM-SBS-124 WORM-SBS-117 WORM-SBS-134

Put the egg hook on the dyneema. That’s how you define the length of the fly. Grab the dyneema, polar chenille and the worm wool and twist it hard.

WORM-SBS-154 WORM-SBS-164 WORM-SBS-174

Grab the egg hook and bring the string to the hook eye and let the strings twist into each other.

WORM-SBS-184

Catch the strings with your thread and cut the polar chenille and the worm wool, but NOT the dyneema fishing line!

WORM-SBS-194 WORM-SBS-204 WORM-SBS-216

Wind the dyneema fishing line around the hook shank , put a drop of super glue on it and secure it with your tying thread very tight!

WORM-SBS-224 WORM-SBS-234

Tie in two another strings of polar chenille and worm wool and twist both strings. Give it a good brush with your velcro. Stroke all fibres to one side.

WORM-SBS-244 WORM-SBS-254

Cut in an angle with your scissors, so the fibres don’t got all the same length. Wind the twisted strands around the shank to the front and catch it with your thread. Cut the strands closely to the bead, do a whip finish and let some thin varnish soak into the front to secure everything.

WORM-SBS-264

Give the worm a complete brush with your velcro and you’re done! A superb worm fly with a great action in the water and some nice translucency, because of the polar chenille. It’s also a very durable pattern and you can tie it in all colors and sizes you like. If you don’t like flies with two hooks, just cut the hook bend of the front or the back hook close to the body.

WORM-SBS-274

..that’s what they are made for!

Veröffentlicht am 27/11/2015 von Holger Lachmann

Antworten

Do you remember this pike streamer I’ve posted some time ago?

When I was tying at the „Niederrheinischer Fliegenfischer Tag“ some weeks ago, Frank Steinmann from Scale-Magazine came along and bought some pike streamers I’ve showed on the table at the show.

Today, I saw what happend to my little buddy from the above picture.

It was eaten by an greedy pike!

It’s always cool to see such shots of a fish with a fly in its mouth that I’ve tied and a fishermen with a big smile on his face! That’s how it should be!

Hope you’ll catch some more Frank!

Btw: Go and visit www.scale-magazine.com it’s a really cool magazine!