Some flies from the last days…
Antworten
Schlagwort-Archive: Grayling
Klinkhamer #12 on Daiichi D1160
A little tie from this morning. A Klinkhamer-style pattern with a wing post of CDC. The body is a mix of three different dubbings including Alpaka, a bit of flash and some synthetic dubbing twisted for a slim, tight body. I used a Daiichi D 1160 Klinkhamer hook # 12.
morning tie
Quill Body CDC Dun # 12 with two toned CDC wing tied this morning. I really like to fish this pattern, also in smaller sizes like #14 & #16
Quill Body Nymph # 14
A little nymph #14 fresh out of the vise. Bug Bond coated quill body, a little bit partridge, a little bit pheasant, some dubbing and a thread. That’s all!
Some food for trout and grayling
Autumn is almost over and the winter is coming… I already miss to fish for trout and grayling, which I’ve done this year not often enough….
Emerger with Quill Body
fast evening tie with picky graylings in mind
emerger # 14 on Daiichi 1167 Klinkhamer hook
Swimming Nymph
Mayfly nymph tied with the swimming nymph materials from the Pro Sportfisher Trout System.
Macro
Freshwater Shrimp with the new Gammarus Foil by Pro Sportfisher – Step By Step
This is a really natural looking freshwater shrimp. Easy to tie and very durable. It’s tied with the new multi colored Gammarus Shrimp Back from Pro Sportfisher and Bug Bond.
You can get the Gammarus Shrimp Backs in different colors and sizes. Here, I used the brown color in small.
It was never easier to tie a super realistic pattern in such a short time. I believe, that it’ll catch fish from Finnland to Italy!
Materials:
- Hook: Tiemco 2487 # 12
- Weight: Lead Foil
- Ribbing: Mono 0,14
- Back: Pro Sportfisher Gammarus brown # small and Bug Bond UV Resin
- Dubbing: SLF Squirrel Spikey Dubbing mixed with Hends Spectra Dubbing
- Tail: CDC Feather
- Thread: Dyneema
Take the hook, push down the barb and put it in your vise. Cut a stripe of lead out of the lead foil and create a nice lead body.
Take a CDC feather and cut off a „V“ from the tip. Tie the feather in as shown.
Take a shrimp back from the sheet and tie it in at the end. Tie also in the mono for the ribbing.
I used for this Gammarus a mix made out of Squirrel Dubbing and Spectra Dubbing. A natural color with a little bit of flash. Dub a not to slim body.
Fold the Gammarus foil to the front and catch it with you tying thread. Then, rib the body with the mono. Catch the mono, cut it off and finish the tying with a whip finish.
Now, take your Bug Bond and coat the back of the shrimp and cure it with the Bug Bond torch.
Pick out some beards and fibres with your dubbing needle to imitate the legs.
The finished shrimp, ready to fish.
The shrimp when wet. I don’t think, that a fish can resist.
Tight lines
Holger
Quill Body CDC Emerger No. 2 – Step By Step
It’s the end of April and the trout and grayling season will start soon.
Here’s another very good emerger pattern, which imitates some different may fly species, depending on the colour and size. It’s tied on the new Daiichi 1167 Klinkhamer hook, designed by the famous dutch fly tyer Hans van Klinken.
The Daiichi 1167 got a stronger wire compared to the Tiemco 212Y for example, which makes sure, that the abdomen hangs deep in the surface. That’s really important and that’s the reason, why this pattern got no tail or a trailing shuck, to make sure, that the abdomen is hanging deep in the surface.
The quill body is covered with a thin coating UV Resin.
Materials:
- Hook: Daiichi 1167 # 14
- Abdomen: Polish Quills &Tack Free UV Resin
- Thorax: Oliver Edwards Master Class Dubbing
- Wing case: CDC
- Wing: CDC
- Legs: Partridge
Put the hook into the vise, do a layer of thread and tie in a stripped peacock quill. Wind the quill around the hook shank and catch it with the tying thread.
Put a little drop of Tack Free UV Resin on the stripped peacock quill and spread it on the abdomen. Cure it with your UV torch.
Tie in two CDC feathers for the wing case. Then tie in the tip of another white CDC feather as a crippled wing.
Dub the body and tie in some partridge fibres to imitate the legs. Fold each CDC feather to the hook eye and catch it with the tying thread. The CDC wing should be exactly in the middle of the feathers.
Cut the CDC feathers for the wing case and do some turns with your whip finisher to create a little head. Varnish the head, if you like. That’s it, ready for fishing. ;-)
tight lines
Holger Lachmann
Quill CDC Emerger
A simple, but quiet effective mayfly emerger.Tie it in different sizes and colours to match the hatch. The body of the emerger should hang deep in the surface. Never put some floatant on the body, only a bit on the thorax and the wings if necessary. With the amount of uv-resin on the quill, you can control, how deep the fly should hang in the surface.
This pattern often made my day, when other patterns were ignored.
Materials:
- Hook: TMC 212Y # 13
- Abdomen: Stripped Peacock Quill and UV-Resin (use tack free resin, if not, you have to coat the resin with nail polish)
- Thorax: Alpaka Dubbing
- Wings: CDC and for splitting some Yarn
Tie in a stripped peacock quill.
Wind the stripped quill around the hook shank and catch it with your thread.
Put a layer of uv-resin around the quill body to secure it.
Tie in a piece of yarn.
Tie in a bunch of CDC fibres.
Spin the dubbing around the thread.
Dub the thorax.
Fold the yarn to the front to split the CDC and catch it with your thread.
Whip finish the fly and cut the CDC in shape.
View from underneath.
tight lines
Holger Lachmann
Biot CDC Parachute
Turkey biots are very good for tying dry fly bodies. They swim really well.
I don’t discribe every tying step here, because they are the same (except the biot abdomen) as you have seen at the quill body CDC parachute tutorial.
Materials:
- Hook: TMC 100 # 16
- Tail: Micro Fibetts
- Abdomen: Turkey Biot
- Wing: CDC
- Hackle: Whiting Genetic Dry Fly
- Thorax: SLF Masterclass
tight lines
Holger Lachmann
Fast CDC Dun
A fast to tie mayfly dun pattern made out of CDC. It floats very well and is durable. I like to fish it in semi-fast running water. Micro fibetts, 2-4 CDC feathers (colour of your choice) and a bit yarn, that’s all you need. I don’t know who invented this pattern, but I think it was Marc Petitjean.
Materials:
- Hook: Maruto D04 BL # 12
- Tail: Micro Fibetts
- Abdomen: CDC Feather
- Thorax and Wing: CDC Feather, Yarn
Tie in a loop of thread and 3 micro fibetts. Split the fibetts with the 2 piece of thread after cutting the loop.
Tie in a CDC feather with the tip first. Twist the feather and wind it around the shank. Then cut all little fibres, so that you’ve got a nice tapered CDC body.
Tie in a piece of yarn.
Preparing the CDC
Split the thread and put the prepared CDC in the gap. Then spin the bobbin to twist the CDC and the thread.
Wind the twisted CDC around the hook and pull it up with your fingers after every turn.
Seperate the the CDC with the yarn, to create the two main wings of the mayfly. Catch the yarn with the thread.
I like to fold the yarn back again, tie it in and cut it, so I make sure I’ve got a nice free hook eye.
A whip finish to secure the fly. Take your scissors…
…and cut the fly in shape. That’s it! If you tied some of them, you need less then 4-5 minutes to tie it.
Fish view
tight lines Holger Lachmann
Quill Body Parachute with CDC Wing
A superb all around mayfly pattern, which lies nicely flat and realistic on the water. Tie it in different sizes and colours to match the hatch. Personally I like to use CDC for the wing instead of polypropylen on the smaller sizes. It just looks more naturally.
Materials:
- Hook: TMC 100 # 16
- Tail: Micro Fibetts
- Abdomen: Stripped Peacock Quill, UV-Resin
- Wing: CDC
- Hackle: Genetic Dry Fly Hackle
- Thorax: SLF Masterclass Dubbing
Tie in a loop of tying thread and the end of the fly.
Tie in 3 micro fibetts, cut the thread loop and seperate the fibetts with the 2 pieces of thread.
Tie in a stripped peacock quill.
Tie in the tips of some CDC feathers as a wing.
Wind the peacock quill around the hook shank and catch it with the thread next to the wing.
Put a drop of tack free uv-resin on the quill body to secure it. Make sure, that there’s just a thin coat on the body.
Tie in the hackle as shown.
Dub the thorax.
Wind the hackle around the wing post and catch it with the thread underneath the hackle.
Cut of the hackle and do a whip finish underneath the hackle. A little drop of really thin varnish secures the whip finish. Ready to go!
View from below aka „the fish view“.
tight lines
Holger Lachmann
Extended Body CDC Caddis
When it’s getting dark on the river, the caddis often become very active. It’s really fun to fish a big caddis fly surfing over the surface. Sometimes the trouts go mad and take the fly very aggressively.
I don`t want to check all the time, if the fly is floating well. The fly should float like a piece of cork all night long. That`s why I like to use materials like CDC and foam for those kind of flies. If you want to treat the fly with fly floatant, you should use a highly fluid floatant like Water Shed. Very important, Water Shed must be completely dried before fishing.
Materials:
- Hook: Maruto C47BL # 12
- Extended Body: Foam
- Wing: CDC and Moose Hock
- Top: Pheasant
- Body and Legs: CDC
- Antennae: Moos Hock
Put a needle in your vise and tie a layer of thread. Very important: Use NOT a waxed thread. If you do, you may get problems pushing the finished body from the needle.
Put a 3 mm wide strip of foam on the needle.
Create some nice segements with your thread. If you got problems creating the body, just google „extended foam body“. There you find some nice videos.
Finish the body behind the last segment with a whip finish.
Pull the extended body from the needle and tie it in.
With a permanent marker you can give the body a nice colour.
As a wing, tie in three CDC feathers. They should be longer than the body.
Over the CDC wing, you should tie in some moos hock hair in the same length like the CDC. It push the CDC down, so the wing is always flat over the body and it increases the floatability. Then tie in some fibres from a pheasant tail. Split the thread, put in some CDC and twist the the thread by rotating the bobbin. I like to work with the Petitjean Magic Tool when preparing the CDC.
If necessary, repeat spinning the CDC and wind it around a second time.
Fot the antennae I used two hair of moose hock.
Pull the pheasant fibres foreward and catch it with the thread.
Spinn some CDC as dubbing around the thread and create a little head, then fold the pheasant fibres back, cut it and whip finish the fly.
To secure the thread and the pheasant use a bit of varnish or really thin uv-resin, which makes the fly very durable.
Finished fly from underneath, or „the fish view“. ;-)
tight lines
Holger Lachmann