Schlagwort-Archive: Fly

Bad Ass Bass Banger – Step By Step

Veröffentlicht am von
2

The Bad Ass Bass Banger – A streamer perfect for bass/perch and zander/walleye. It has a great action under water, because of the excellent moving tail, the jigging and the massiv front collar, which pushes a lot of water. It’s easy and fast to tie, durable and just a great fishing fly. The jigging can be controled by the weight of the brass dumbells.

Materials:

  • Hook: Gamakatsu F 314 # 4
  • Thread: Dyneema white and UTC fluo green
  • Dubbing: Ice Dubbing Chartreuse
  • Tail/Body: Tiger Barred Rabbit Stripes
  • Front Collar: Tiger Barred Rabbit Stripes
  • Head: Brass Dumbells with Eyes, Senyo’s Laser Dub fluo chartreuse + green/ chartruese, Bug Bond
  • Flash: Krinkle Mirror Flash

 

Put the hook in the vise, wind a good basement of thread and tie in the dumbell eyes. Use super glue during the tying, so the dumbells won’t slip around the hook shank during fishing.

 

Splitt the thread or make a dubbing loop, but the ice dubbing in the gap and twist it, then brush ist with your velcro-brush and wind it from the back to the front behind the dumbells. Then brush the dubbing body again.

Jab the hook through the leather of the rabbit stripe and tie the stripe right behind the dumbells down. Secure the punctured stripe with a little drop of super glue.

 

Bad Ass Bass Banger (15) (Mittel)

Tie in the krinkle mirror flash an each side. I prefer to use two or more different colors of flash. Split the thread again and put some rabbit stripe in a material clamp and cut away the leather. Put the rabbit stripe hair into the thread gap and twist the thread, then wind it around the hook next to the dumbells.

 

Bad Ass Bass Banger (17) (Mittel)

Change the thread and tie in the laser dub like shown on the pictures above on top and on the underside. The lighter color always belong to the underside.

 

Finish with a nice massive thread-head, which pushes the senyo back.

 

Push the senyo dubbing on the underside to the back and apply the Bug Bond on the underside and on the head.

Ready to fish! Wish you a lot of fun with the Bad Ass Bass Banger!

tl

Holger Lachmann

Pissed Off Shrimp

Veröffentlicht am von
2

I tied a smaller shrimp on a Partridge CS 54 # 8, using the Pro 3D Shrimp Shell in XXSmall clear on pink base. The shrimp is weighted with a small tungsten shrimp weight. The legs are made out of CDC, the antennas are Whiting Rooster Spey Hackles. It’s not a really a complicated pattern and I’ll tie some more in different colors for my seatrout fishing in the Baltic Sea.

Articulated Pike Streamer

Veröffentlicht am von
Antworten

Well, it’s raining, wind is blowing really strong and the snow melts. Right weather to tie a fly, watching fish porn and dreaming about the fishing season to come.

I used the 35mm Articulated Shanks and the new Living Eyes „Ice“ from Flymen Fishing Company for it for this pattern, together with arctic fox, zonker stripe and Senyo’s Laser Dub.

pike-pink-blue-white-mittel

Wiggle-Fox for Pike

Veröffentlicht am von
Antworten

Inspired by my buddy Alex Jobski, I tied this Wiggle-Fox tuned with a Zonker Stripe. Looks pretty cool! Thanks Alex! ;-)

wiggle-fox-for-pike-collage-mittel

Mean Green Pike Piercer

Veröffentlicht am von
2

A cold sunday afternoon. After a very stressful week, I was sitting at my tying desk, not directly knowing what to tie. I just let my ideas flow. The result is a big pike tube fly, the „Mean Green Pike Piercer“. It’s tied on a Pro Sportfisher Flexi Tube and for the head I used a Pro Softhead.

pro-pike-tubelogo-mittel

Pro Tube Baitfish Step By Step

Veröffentlicht am von
3

When I was a child, I got a big box full of LEGO. I loved to play with it for hours! Ok, my mom was often not so happy, because after playing, my room looked like after an explosion of a bomb. :-)

I still „play“ with a kind of LEGO today. Well, it’s more like a fly tying LEGO. I’m talking about the tube fly system from Morten Bundgaard, owner and chief creative of Pro Sportfisher. Like Lego, everything fits together perfectly. It’s just so fun to be creative and to find out, how much is possible.

For this step by step of the Pro Tube Baitfish, I used several products of Pro Sportfisher, especially the new Pro Raw Weights made out of tungsten and the brand new Pro Softheads, which are awesome. Perfect alternative to epoxy and uv resin for cool heads.

Materials:

  • Pro Flexitube clear
  • Pro Soft Sonic Disc clear
  • Pro Raw Weight
  • Pro Softhead
  • STS-Dubbing Fluo Flame
  • Ice Dub Pearl
  • Arctic Fox White
  • Pro Angelhair HD Pearl Green
  • Senyo’s Laser Dub White and Olive
  • 3D Eyes

Put the Pro Flexitube on the Pro Tubefly-Needle and do some turns with the thread. Split the thread and put some STS-Dubbing ind the gap and spin the bobbin. After twisting, give the dubbing a good brush with your velcro and wind it around.

Put a little bit of super glue on the thread and do some turns. Cut of the thread and put a clear Pro Soft Sonic Disc on the tube. In front of the disc, attach the thread to the tube again.

Take a bunch of fox and tie it in directly in front of the disc. Take some strands of Pro Angelhair HD and tie them in, too. At last, take another bunch of fox, slightly longer than the first bunch, spread it a little bit and tie it on top.

Split the thread again, put some ice dub pearl into the gap, spin the bobbin and brush the twisted dubbing. Wind the dubbing around, brush it again and put the Pro Raw Weight in front of the dubbing. This will give the tube a nice balance with a little bit jigging.

Take the white Laser Dub and tie it underneath the tube, then so the same with the olive Laser Dub on top. If you want, you can give the dubbing on top some dots or stripes by using a permanent marker.

Make a short whip finish and cut off the thread. Put the Pro Softhead on the tube and border the tip of the tube with your lighter. Just do a little drop of super glue into the recess and glue in some 3D-eyes of your liking. That’s it, you got a great baitfish tube! Just attach a single hook like the Owner Mosquito for example and you are ready to go!

New Zonker Muddler

Veröffentlicht am von
5

This a kind of pimped Muddler Minnow. I use a piece of zonker stripe for the tail, some fancy dubbing mixed with flash dubbing, krinkle flash, a deer hair muddler head, funky eyes and and a heavy tungsten bead to get it down to the predators. One of my absolut favorite streamer pattern for trout and seatrout!

 

Missing Link

Veröffentlicht am von
Antworten

Missing Link – Everything comes together:

Rabbit Stripe, Articulated Shank, Krinkle Flash, Crazy Legs, Ostrich, SLF+Flash-Dubbing, Arctic Fox, Deerhair-Head and nice Eyes.

Great Dubbing Mixes In 30 Seconds

Veröffentlicht am von
4

Here is a super easy and fast way to mix dubbings. You only need the dubbings, a wire brush for pets and a dubbing neddle.

Here are the dubbings I choose for this demo. Two bright colors and flash dubbing.

Make a sandwich out of the three dubbings.

Take the dubbing sandwich and stroke it into the wire brush.

Take your dubbing needle to pull the dubbing out of the brush.

Here is the first result after the first round. Looks nice! If you want the dubbing do be better mixed, go for another round on the brush.

Here is the result after the second round on the wire brush.

Finally the result after the third turn on the brush. Super mixed two toned dubbing with flash highlights in less than 30 seconds!  What could be more easy?

tl

Holger Lachmann

….big is beautiful…

Veröffentlicht am von
1

After tying some flies for grayling in size 18 & 20 I decided to tie two pike flies on Partridge Predator hooks size 4/0 as an equalization….one very colorful, the other one in muted colors….

Tied mainly with rabbit stripes and arctic fox.

 

Articulated Pike Streamer In The Water

Veröffentlicht am von
Antworten

I made two short videos how the articulated pike streamer move in the water. The blue streamer is the same as the white/olive one, just another color. Due to the big head made from uv-resin, the craft fur keep its volume in the current and moves really nicely!

[vimeo]https://vimeo.com/52331026[/vimeo]

 

p1120427-mittel

 

[vimeo]https://vimeo.com/52330517[/vimeo]

p1120302-mittel

 

Easy Pike Zonker Step By Step

Veröffentlicht am von
6

One of my most fished patterns for pike. It’s easy to tie, very durable, you can tie it in the length you want and it wiggles nice through the water. You can also use arctic fox for the front collar instead of finn raccoon. Works well, too.

Materials: 

  • Hook: Gamakatsu F 314 # 1/0
  • Ribbing: Mono
  • Body: Ice Dub Holographic Silver and Ice Dub Pearl mixed together
  • Wing/Tail: Finn Raccoon
  • Flash: Gliss’n Glow Pearl, Krinkle Mirror Flash Pearl and Lateral Scale Pearl
  • Front Collar: Finn Raccoon or Arctic Fox
  • Hot Point: Fluo Thread
  • Eyes: Deer Creek
  • Head: Bug Bond

Tie in a piece of mono for the ribbing and mix ice dub pearl and ice dub holographic silver. Then split the thread and put the dubbing mix into the gap. Spin the bobbin to twist the dubbing. Wind the dubbing hank around the hook shank and give it a good brush with your velcro.

Tie in a piece of finn raccoon zonker 5mm next to the hook eye. Then ribb the raccoon zonker with the mono to secure it on the hook shank and catch the mono with your thread.

Tie in the krinkle mirror flash and the gliss’n glow. Then form a loop with your thread and wax the loop. Put a piece of finn raccoon in the loop and cut away the leather. Twist the loop with the raccoon slowly. When the fur is secured in the loop, wind the raccoon around the shank to the hook eye. Comb the twisted raccoon after every turn.

 

Tie in a strand of lateral scale pearl on each side and split the thread. Put again some dubbing in the gap und twist the bobbin Wind the twisted dubbing around and brush it with your velcro to give the head some extra sparcle.

 

If you like it, you can do a little hot point with some fluo thread. Glue some sexy eyes on the head and secure the head with Bug Bond.

Ready for pike!

tl Holger Lachmann

Articulated Pike Streamer Step By Step

Veröffentlicht am von
Antworten

Here’s an example for an articulated pike streamer, which is easy to cast, because we try to create volume without putting to much material into the fly. To much material makes the just inflexible (and expensive ;-) )

I used for this pattern the new articulated shanks from the Flymen Fishing Co. in 35mm to get the right movement and position of the hook.

 

Material:

  • Hook: Gamakatsu SL 12 S # 4/0  (be carefull, they are soooooo sharp!)
  • Articulated Shank: 35mm from Flymen Fishing Co.
  • Tail and Wing: Arctic Fox chartreuse and black
  • Feather: Green Grizzly Hackle
  • Body: Ice Dub Pearl
  • Flash: Krinkle Mirror Flash pearl and Flashabou Mirage Saltwater
  • Eyes: Hareline fluo yellow
  • UV-Resin: Bug Bond

 

Put the hook into the vise, do some turns with your thread and tie in the fox as tail and some strands Flashabou Mirage.

 

Split your tying thread or form a dubbing loop and put the ice dub between and twist it. Then brush it with your velcro and wind it around the hook shank.

 

Tie in some fox with the tips pointing to the hook eye, cut the waste, put again some dubbing between the thread, twist it and wind it to the front. Then go with the thread between the fox hair to the hook eye.

 

Push the fox hair with an empty pen towards the hook bend. Then tie in a green grizzly hackle on each side and some strands of krinkle mirror flash. Whip finish and secure with super glue.

 

Attach the hook with the articulated shank and put the shank into your vise. Then close the gap with a strong thread and super glue (the little pearls on the thread) to fix the hook. This will hold forever!

 

Create another dubbing hank and wind it around to create a little bump. Then tie in a bunch of artic fox on the hook shank and a bunch underneath. Comb the hair carefully. Another dubbing hank will follow.

 

Tie in two green grizzy hackles and some krinkle mirror flash. Then comb a bunch of black arctic fox and tie it in like shown on the picture. Trim away the waste and do some rounds with dubbing and do a quick whip finish secured with super glue.

Push the black fox backwards, attach the eyes and secure the whole head with Bug Bond.

That’s it! Ready to go. Have fun with the pikes!

Holger Lachmann