Schlagwort-Archive: Fly Tying

Captain FuzzyBug’s ready for a new mission

Veröffentlicht am von
2

Is it a wetfly? Is it a nymph? Is it a flymph? – It’s CAPTAIN FUZZYBUG!

IMG_5930-1

Sometimes trout like flies, which are presented actively. That happend to me the last time at the river. Dead drift was not what they liked. The „Leisenring Lift“ brought fish and wet fly swing with a little bit shaking.

Normal wetflies often fish to high in the water, especially in spring, when the water is still very cold and the fish are not willing to rise. CAPTAIN FUZZYBUG is weighted and swings deeper in the water column.

The mix of partridge, hare’s ear, ice dub, tinsel and CDC gives this fly the fuzziness and the trouts the illusion of something eatable. It’s a „in case of“-fly which produces takes even if the normal patterns won’t work.

It’s also not complicated to tie, so tie 3-4 and put them in your fly box. You’ll never know when you’ll need the help of CAPTAIN FUZZYBUG! ;-)

Martin Rudin’s Leftover Nymph

Veröffentlicht am von
Antworten

11037348_816405895073444_2135846090574177272_n

This is my first try on Martin Rudin’s very nice „Leftover Nymph“. It looks very realistic und is not as complicated to tie, as you may think.

Martin did a nice step by step tutorial on his website. It’s in swedish, but you can see clearly how he ties his fly.

Here is the direct link:

Leftover Nymph

There you will find also other nice patterns! It’s worth to check them out!

Pimp my vise

Veröffentlicht am von
Antworten

20150330_074134-1

My old pedestal base of my Dyna King vise looked a little bit shabby after some years of tying. It also didn’t like the black color, because you couldn’t see black hooks on it very good. So I decided to give the pedestal base a new look. I used a very durable varnish, but I think it’s not so durable like the original coating (maybe the original was powder coated….). Future will show if I used the right varnish for this project. The result is better than I thought. The vise looks quite elegant with this white color. A total change of the appearance. Hopefully the new flies will be as elegant as the vise… ;-)

Caddis Larva Step By Step

Veröffentlicht am von
11

IMG_5634-1

Here we go again! After moving to a new server, it’s time for a new step by step tutorial. This Caddis Larva is a very nice imitation of the original and it’s still quite easy to tie. So, it’s not a drama, when you lose it on the river bottom.

You have to fish this larva deep, that’s why there is a lot of weight in it. It still got a slim body, so it sinks fast to the ground. You will find Caddis in almost every river and it’s an important part of the fish’s menu.The coloration with the brown line on the abdomen is not a must. I just did it to show you what for possibilities you have with ordinary marker pens. It’s tied on a # 10 hook, which sounds pretty big, but the body length is close to the original, just try to keep a slim, natural looking body. Ok, let’s start!

Materials:

  • Hook: Demmon Competition G601 BL Fly Hook # 10
  • Weight: Lead-Foil
  • Ribbing: Mono 0,10mm
  • Back: Stretch Flex Clear
  • Abdomen: Sow Scud Dubbing Beige
  • Thorax: Siman Peacock Dubbing Brown
  • Thread: G.S.P. 50 D
  • Coloration: Edding 3000 Marker Pens

IMG_5603-1

IMG_5605-1

Wind the lead foil in multiple layers around the hook.

IMG_5607-1-2

IMG_5608-1

IMG_5609-1

IMG_5610-1

IMG_5611-1

Take a CDC feather and cut out the feather steam on the top and tie the feather in like shown on the pictures to create the little tail.

IMG_5612-1

IMG_5613-1

Take the stretch flex and tie it in at the back of the fly. Do the same with the mono for ribbing.

IMG_5614-1

Dub the abdomen on 3/4 of the hook shank with a nice tapering.

IMG_5616-1

IMG_5618-1

IMG_5619-1

Split the thread with your dubbing needle, put the peacock dubbing in the gap, rotate your bobbin to spin the dubbing and wind it around the hook to create the thorax and the legs in on step. Leave a little bit space for the head next to the hook eye.

IMG_5621-1

IMG_5623-1

IMG_5624-1

Fold the stretch flex to the front and catch it with your tying thread next to the hook eye. Fold it back, catch it again with your thread and cut away the excess. That’s the easiest way to form a nice head.

IMG_5625-1

IMG_5628-1

Take the mono and ribb the abdomen in small segments and the thorax in two bigger segments. Catch the ribbing with your tying thread and cut it off. Do two whip finish, cut the tying thread and the tying is done.

IMG_5631-1

IMG_5632-1

IMG_5634-1

With the marker pens, you can give the larva the coloration of your liking or the spicific colors of the originals in your home waters. Put a drop of varnish on the head and the fly is finished, ready to be presented to the fish of your dreams! :-)

Tight lines!

Playing With Colors On This Pike Tube

Veröffentlicht am von
Antworten

The sky’s gray, it’s cold, it’s not allowed to fish for predators with mean teeth at the moment… what could you do to bring back some nice thoughts into your mind? Bring some colors on your tying desk! :-)

This colorful pattern makes me smile! I hope you smile as well! :-)

IMG_5579-1

Tying Frankenstein Tubes

Veröffentlicht am von
3

I tied some flash tubes for pikes in the past. They looked good, but nowadays there are special plastic tubes for pike with a really big diameter available, which makes it easier to get the wire leader through it. So I rebuild most of my tubeflies and used their materials to tie new ones, mostley the eyes, flash and hackles.

This is the result. I’m quite satisfied how Frankenstein looks now. ;-)

IMG_5575-1-2

Winged Ant Step By Step

Veröffentlicht am von
2

993543_789255984455102_6757422374577850756_n

Ants are everywhere, especially in the summer, when the winged ants are flying around. Fish love to eat them, so it’s logical to have some ants in your fly box. This is an easy to tie pattern and with a little bit floatant, it swims very well. I tied here a version with some foam as underbody, coated with uv resin. It’s for the faster flowing water. I tie another version with the two segments completly made with uv resin without any foam. The secound version sits deeper in the surface film, which looks more natural in slow water, where the fish got more time to take a closer look. The shape of the hook is not so important, as long as the hook gap is big enough.

IMG_5504-1

Materials:

  • Hook: Dry fly hook # 12-16
  • Body: Foam coated wit Bug Bond UV Resin and colored with a black Marker Pen
  • Hackle: Whiting black
  • Wings: Flash Dubbing

IMG_5530-1

Tie in the foam and fold it to the front and tie it down.

Do the same for the front segment and color it with a marker pen.

Take some Bug Bond Original and cover both segments with the resin and harden it with your BB torch.

Take some strands of flash dubbing and tie it in just before the first segment. It should be tied in V-shaped, so it looks like wings.

Tie in a black hackle and wind it in three turns to the front and catch it with your thread and do a whip finish.

The result. A nice little ant fly ready for the fish.

From Big To Small

Veröffentlicht am von
Antworten

After tying some streamers, I thought I need a break and should tie some smaller stuff. This is a fully dressed parachute dry fly size 22 with a quill body secured with Bug Bond Lite. For the tail I used Coq de Leon and the hackle is grizzly from Whiting. The wing post is made with Tiemco Aero Dry Wing.

IMG_5486-1-2IMG_5496-1

OZO Streamer

Veröffentlicht am von
3

I wanted to tie a new streamer pattern and it should have a great movement in the water. So I united 3 importend characteristics:

  • movement because of the articulation
  • movement because of the material
  • movement because of the weight

So I tied an articulated fly with ostrich and zonker strips and put on a Fish Skull Baitfish Head. These aluminum heads are weighing about 0,45 g. Enough weight to let the OZO Streamer jig, light enough to cast it easily.

The ostrich and the zonker stripes are moving fantastic. Every little piece of the fly is moving and jigging like it is something real.

There are two Gamakatsu F 314 #6 hooks in this fly. The front hook is normal, the tail hook is pointing upwards. If you don’t like to fish tandem hooks, or it is not allowed in the water you fish…no problem! Just cut off the first hook with a pair of pincers and your are ready to go.

OZO Streamer

Dancing Squid

Veröffentlicht am von
3

Three DANCING SQUIDS I finished last night in three different colors:
white/pearl | white/uv-sand | white/uv-pink

The idea behind this fly was to create a squid pattern, for fishing in the Baltic Sea for sea trouts. I wanted a squid pattern with a great movement in the water and it must be easy to cast. There are a lot of squid patterns around, but we fish for sea trout mostly with 6 and 7weights and casting long distances, so the less material the better. The DANCING SQUID moves great because of the sili legs, the ostrich and the articulation. The mantle is made from arctic fox and laser dub and got a nice translucency. They are weighted and tied on a Gamakatsu F 314 #4.

Watch out sea trouts, the DANCING SQUID is coming!  ;-)

Dancing Squid